Toshiba IP5000-UG-VC Telephone User Manual


 
Strata CIX IP5000-series Telephone UG 07/09 178
Release and
Ans
Release and Answer – Press to disconnect or complete the transfer the current outside or
extension call and automatically answer the new incoming outside or extension call.
Release Call
Release – Press to disconnect or complete the transfer of the current outside or extension call
and to place your station in the idle condition.
SD or
Customized
Button
Speed Dial – Press to Speed Dial a telephone number or feature access codes. SD buttons can be
used as either System Speed Dial numbers or Station Speed Dial numbers.
Spd Dial Lng
Pause
Pause (Long) – Press to insert a 10-second pause when programming Speed Dial numbers.
Spd Dial
Pause
Pause – Press to set either a one-half or two-second pause when programming Speed Dial
numbers. (The pause time is set in system programming).
Start
Start – Press to make an outgoing call using an ISDN trunk.
Sub
Sub address – Press to enter a sub address on an ISDN trunk outgoing call.
Tel Set
Music
Background Music – Press to turn Background Music on or off over your station speaker.
Tone Dial
Select
Tone – Press to change the outgoing dialing of the outside line in use from dial pulse to tone
signaling.
Unlock Door
Door Unlock – Press to unlock a door lock mechanism.
Table 25 Programmable Feature Button Labels
Code
Feature
Name
1 2 3 4 5 6 7 8 9 10 11 12
LCD
Default
Label
User
Can
Rename
000
Unused
Key
100
Prime DN
Key
E x t . x x x x x
Ext.
XXXXX
(CLID)
Yes
110
Secondary/
Phantom
DN Key
E x t . x x x x x
Ext.
XXXXX
(Caller ID)
Yes
Table 24 Programmable Feature Button Definitions (continued)
Button Definitions