Filter
Top Products
Administrator Programming
IP5131-SDL Settings
162 Strata CIX IP5000-series Telephone UG 07/09
Backlight Mode Screen
1. From the IP Configurations menu, select Others > BL
Mode. The Backlight Mode screen displays.
2. Choose Always Off, Always On or On-Demand
softkey to setup when you would like to use the
backlight.
3. Press the Set soft key to accept the change.
...or press the Cancel soft key to cancel the change and
go to the Other Settings screen.
Backlight Timer
1. From the IP Configurations menu, select Others > BL
Timer. The Backlight Timer Value x10sec screen
displays (shown right).
2. Enter the New Timer value to change the setting.
Note Use the dial pad to enter a value of (1~30), where
1=10 seconds and 30=300 seconds.
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Other Setting screen.
Backlight Brightness
1. From the IP Configurations menu, select Others > BL
Bright. The Backlight Bright screen displays (shown
right).
2. Enter the New Brightness value to change the setting.
Note Use the dial pad to enter a value of (1~3).
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Other Setting screen.
Backlight Mode
Always Off
Always On
[Set] [Cancel]
Config
On-demand
Backlight Timer x10sec
25
Backspace = Vol-Down
[Set] [Cancel]
Config
:Current
: New [1: Min - 30: Max]
Backlight Bright
0
Backspace = Vol-Down
[Set] [Cancel]
Config
:Current
: New [0: Dim - 3: Bright]