Toshiba DKT2510-FS Telephone User Manual


 
48
Strata CT Digital Telephone User Guide November 2001
DTMF Tone Dialling with * and # Features
DTMF Tone Dialling with * and #
You may have to send
*
and
#
##
#
DTMF tones to some devices or services, such as a voice mail device
or computer output service. DTMF tones are automatically enabled on stations with
Speed Dial
. If
you do not have
Speed Dial
, you must first dial
*
,
#
to enable these tones.
This feature disables the Speed Dial feature during the call. Speed Dial is restored when you complete
the call or place it on hold.
To output
*
and
#
DTMF tones on a telephone without a
Speed Dial
button
While on an outside call, press
*
, then
#
. You can now output
*
and
#
, DTMF tones, and digits
0
~
9
for the duration of the call. This procedure must be repeated on each call where you require
such output.
Emergency Ringdown/Hotline Service
The Emergency Ringdown or Hotline Service feature enables standard telephones to automatically
ring a designated extension by going off-hook. Digital telephones cannot perform this feature, but
they can receive Emergency Ringdown or Hotline Service from standard telephones.
Emergency Ringdown is used in healthcare facilities, where it is used to assist
callers who may not be able to complete a call by dialling. An example of an
incoming Emergency Ringdown call is shown on the right. The calling [DN]
and Ringdown displays whether soft keys are ON or OFF.
This same feature is also known as Hotline Service and is often used for telephones in hotel/motel
lobbies.
RINGDOWN
205 CALLING