Filter
Top Products
Strata CT Digital Telephone User Guide November 2001
153
Add-on Module/DSS Console Features
Paging
You can make an announcement page to a group of station telephone speakers selected in system
programming with
All Call Page
on the DSS console.
SD
(if programmed) on either the DSS
console or the DADM can be used for page announcements. See “All Call Page” on Page 60.
Call Forward Override ([DSS] Override)
Either the DSS buttons on your DSS console or the associated telephone can be set in system
programming to ring stations that are in the Call Forward mode, instead of being forwarded. Usually
the console’s telephone is the unit activated to perform this function. Among other applications, this
feature can be used to notify a person who forgets to deactivate the Call Forward feature after
returning to the office.
Important! DSS buttons on DADMs cannot override Call Forward.
➤
To override call forward with the console’s associated telephone
➤
To override call forward with your DSS Console
➤ Press the station [DSS] set for call forward.
Night Transfer
You can use the DSS console to make the system ring different telephones for incoming calls during
different times of the day. For further details, refer to the Strata CT System Administrator’s User
Guide.
➤
To enable/disable night transfer
➤ Press
Night Transfer
to toggle night transfer ON/OFF.
1. Press
Cnf/Trn
Cnf/TrnCnf/Trn
Cnf/Trn
or [PDN].
2. Dial the station number set
for call forward.
Make the call as you would from any other station. This
procedure assumes your station has a typical program setting.