Filter
Top Products
126
Strata CT Digital Telephone User Guide November 2001
Call Park Orbits Single Line Digital Telephone Features
Call Park Orbits
The Call Park feature enables you to hold a call temporarily in an orbit (the area where the call is
held). Anyone can retrieve the call from the orbit using the same or a different station. There are 20
General Park Orbits for the system and 1 Personal Park Orbit for each station.
Once you have parked a call in an orbit, you can:
♦
Hang up and retrieve the parked call at a later time
♦
Originate another call
♦
Access a voice paging device to announce the parked call for pickup from another station
➤
To park a call
1. While on a call, press
Cnf/Trn
. You hear dial tone.
2. Press
#332
.
3. Enter a General Orbit Number
(
900~919
) or [PDN].
You hear a one second confirmation tone. The call is parked at
the orbit or to an assigned [PDN]. If an orbit number is busy,
repeat Steps 1~3 with another orbit number.
4. Hang up. Once the call is parked, you can make or receive other calls.
Notes
●
If the parked call is not retrieved within a specified time, the
call rings back to your phone.
●
If your phone is busy when the parked call recalls, you hear
two tones of two short beeps, three seconds apart. You can
place the new call on hold and answer the parked recall or
end the second call and answer the parked recall by hanging
up. The parked call remains camped onto your phone until
you respond.