Filter
Top Products
96
Strata CT Digital Telephone User Guide November 2001
Messages LCD Operation
➤
To enter/store a station message
➤
To set an advisory message for incoming calls
1. Press
LCD Msg Select
...or [PDN] +
#68
.
The LCD Msg Select/[PDN] LED
flashes.
2. Enter the two-digit message
number (10~19) to be stored.
The current message, if any, is displayed.
3. Enter the message.
(See “To enter LCD
characters” on Page 94.)
The LCD Msg Select/[PDN] LED lights steadily, and the
LCD displays the message. The message is now stored in
system memory.
4. Repeat Steps 1~3 for any
additional messages you want
to store.
5. Press
LCD Msg Select
...or
Spkr
.
The message displays on your LCD an Advisory Message
(see below). To cancel the message display, press [PDN] and
dial
#68
or press
LCD Msg Select
.
1. Press
LCD Msg Select
...or a [PDN] +
#68
.
The LCD Msg Select/[PDN] LED
flashes.
2. Enter the desired message
number:
10
~
19
(station)
...or
60
~
99
(system)
The selected message displays. (This
assumes the message has already
been stored in memory.)
3. Press
LCD Msg Select
...or
Spkr
.
The message displays on your telephone’s LCD. The LCD
Msg Select/[PDN] LED lights continuously. The selected
message is sent to LCD phones when they call your [PDN] or
any [PhDN] owned by the telephone.
MSG NO. ?
MSG NO. ?
MSG NO. 10