Filter
Top Products
Features
Call Waiting
44 Strata DK Digital Telephone 6/00
Call Waiting
You can answer a call that is transferred to your station, even when your station is
busy. When another call is camped onto your station, you hear two camp-on tone
beeps and the [DN] or Line LED flashes red (on-hold).
If a call is sent to your station when busy, and your station does not have a [DN] or
/LQH button available to receive the call, two camp-on tone beeps are sent to your
telephone. You must disconnect or transfer the existing call to answer the waiting call.
➤ To answer a waiting call by placing the current call on-hold
➤ To answer a waiting call by disconnecting or transferring the current call
➤ Press
+ROG The existing call is placed on-hold. The camped-on
line rings your station (the Line LED flashes green -
incoming call).
...or if your telephone
has the Auto Hold
feature, just press the
flashing [DN] or
/LQH.
You are connected to the transferred call. The [DN] or
Line LED flashes green (in-use).
Note See your System Administrator to find out if
you have Auto Hold.
➤ Hang up or transfer
the existing call; the
camped-on call rings
your station
The existing call disconnects or transfers. The camped-
on line rings your telephone and the Line LED flashes
green (incoming call).
...or press the flashing
[DN] or
/LQH.
This disconnects the current call and connects you to
the transferred call. The [DN] or Line LED flashes
green (in-use).