Filter
Top Products
LCD Operation
Caller ID/ANI/DNIS Information Mode
Strata DK Digital Telephone 6/00 97
Caller ID/ANI/DNIS Information Mode
Automatic Number Identification (ANI) information cannot co-exist on the same
telephone LCD with Dialed Number Identification Service (DNIS) information. If
your system is programmed to receive both ANI and DNIS information on incoming
calls, press
3DJH while the call is ringing to alternate between DNIS and ANI/Caller
ID LCD displays. After you answer the call, you can not alternate between displays.
DNIS
Incoming DNIS telephone numbers can be correlated in the system database with
assigned DNIS names. These names, up to 16 alphanumeric characters, display on
your telephone’s LCD, enabling incoming calls to be instantly identified and
appropriately answered. Table 10 shows DNIS samples.
ANI/Caller ID
If your telephone is programmed to receive Caller ID names and numbers, the calling
party’s name displays. Table 10 shows ANI samples. If Caller ID was activated, then
the caller’s name and/or number would appear on the first line.
➤ To display the number while the call is ringing
➤ To activate the Caller ID/ANI or DNIS display mode
➤
Press 0RGH + . (The system default is ON.)
➤ To deactivate the Caller ID/ANI or DNIS display mode
➤
Press 0RGH + .
➤ While the call is
ringing, press
3DJH.
MR. JONES
LINE 3 RINGING