Filter
Top Products
LCD Operation
Messages
Strata DK Digital Telephone 6/00 105
➤ To set an advisory message for incoming calls
3. Enter the message.
(See “To enter LCD
characters” on Page
102.)
The LCD Msg Select/[PDN] LED lights steadily, and
the LCD displays the message. The message is now
stored in system memory.
4. Repeat Steps 1~3 for
any additional
messages you want to
store.
5. Press
/&'0VJ
6HOHFW
...or 6SNU.
The message displays on your LCD an Advisory
Message (see below). To cancel the message display,
press [PDN] and dial
or press /&'0VJ
6HOHFW
.
1. Press /&'0VJ
6HOHFW
...or a [PDN] + .
The LCD Msg Select/[PDN]
LED flashes.
2. Enter the desired
message number:
~ (station)
...or
~ (system)
The selected message
displays. (This assumes the
message has already been
stored in memory.)
3. Press /&'0VJ
6HOHFW
...or 6SNU.
The message displays on your telephone’s LCD. The
LCD Msg Select/[PDN] LED lights continuously. The
selected message is sent to LCD phones when they call
your [PDN] or any [PhDN] owned by the telephone.
4. If you have Call
Forward set, press
3DJH to display the
message instead of
the CF display.
MSG NO. ?
MSG NO. 10