Filter
Top Products
Features
Call Forward
34 Strata DK Digital Telephone 6/00
Call Forward—External
➤ To cancel a Call Forward–External
➤
Press &DOO)UZG([WHUQDO
...or [PDN] + + 6SNU.
1. Store the destination
number at Station
Speed Dial location
Code 49 (RCTUA, B,
C/D processors) or
location 139
(RCTUE/F
processors).
Only perform Step 1
the first time Call
Forward-External is
set or when you
change the
destination. It is not
necessary to store the
destination each time;
it remains in system
memory.
This feature enables you to forward new incoming
calls directed to your [PDN] to a destination outside of
the system. [PhDNs] assigned to your telephone do not
Call Forward to an external destination. Internal calls
and transferred calls to your [PDN] do not forward to
external destinations.
Only incoming calls over CO lines dedicated to
immediately ring on your [PDN], private CO
/LQH
button, and/or Direct In Dial line calls forward. Any of
the other Call Forward modes can be set for your
[PDNs] or [PhDNs] simultaneously with Call
Forward-External.
Use the Speed Dial storage procedures detailed on
Page 70. When forwarding to an outside destination
include the CO Line (or CO Line group) access code
before the telephone number.
Example: 8015833700
801 = CO Line access code
5833700 = Telephone number
See Table 13 on Page 134 for CO Line/Line Group
access codes. The LCR access code “9” cannot be
used.
2. To set CF-External,
press
&DOO)UZG
([WHUQDO
...or the [PDN] +
.
Incoming calls forward to the destination stored at
Station Speed Dial Location 49.