Filter
Top Products
- Repeatedly press the Menu key until 'TELEPHONE' appears.
- Press the OK key.
- Repeatedly press the Menu key until ‘SUBSCRIBE’ appears.
- Press 'OK' or ‘BACK’ to go back.
- Repeatedly press the Menu key until ‘RESET BS’ appears.
- Press 'OK' or ‘BACK’ to go back.
- Enter the number of the base unit you want to reset (1-4). Press OK.
- Enter the base unit PIN code (0000) and press OK.
- 'RESET?' appears on the display.
- Press 'OK' or ‘BACK’ to go back.
4.23.2. Resetting Handset
Here the factory settings of the handset are set again.
The factory settings are:
PIN: 0000
Internal and external ringer melody: 1, volume = high
Key tones: On
Volume: Volume 2
Handset name: Handset 1
- Repeatedly press the Menu key until 'TELEPHONE' appears.
- Press the OK key.
- Repeatedly press the Menu key until ‘SUBSCRIBE’ appears.
- Press 'OK' or ‘BACK’ to go back.
- Repeatedly press the Menu key until ‘RESET HS’ appears.
- Press 'OK' or ‘BACK’ to go back.
- Enter the handset PIN code (0000) and press OK.
- 'RESET?' appears on the display.
- Press 'OK' or ‘BACK’ to go back.
4.24. Receipt of a external call during an internal call
If you receive an outside call during an internal call, you will hear a call waiting
tone (double beep) on both handsets being used for the internal call.
- Press the Line key twice to accept the outside call.
- After finishing your call, press the Line key to hang up or put the handset
back on the base unit.
4.25. Transferring a call to another handset
- You have an outside caller on the line.
- Press the 'TRANS' (through-connect) key.
Butler 1410
82
Butler 1410
82
Butler 1410
82
Butler 1410
82
handl. B1410 10/9/01 10:39 am Page 82