Filter
Top Products
Butler 1410
72
Butler 1410
72
Butler 1410
72
4.8. Locking the key pad
If you lock the alphanumeric keypad, it is impossible to dial a telephone
number. Only the softkeys can still be used.
Switching on Call Barring
- Press the Menu key.
- Press the '*' key.
- 'KEYGUARD ON' appears on the display.
Switching off Call Barring
- Press the first softkey.
- Press the '*' key.
- 'KEYGUARD OFF' appears on the display.
4.9. Turning off the microphone (mute)
It is possible to turn off the microphone during a call by pressing the Mute key.
Now you can speak freely without the caller being able to hear you.
- During a call press the Mute key.
- ‘MIC OFF’ appears on the display and the handset sounds a beep.
- When you would like to resume the conversation, press the Mute key again.
4.10. Locating a misplaced handset (paging)
If you cannot find the handset, briefly press the Paging key on the base unit.
All handsets subscribed with the base unit will sound a signal so you can locate
the misplaced handset.
To stop the sound press the Paging key again.
4.11. R key (flash)
Press the Flash key (r) to use certain services such as "call waiting" (if your
telephone company offers this feature); or to transfer calls if you use an
internal switchboard (PABX).
Note: The flash time can be programmed (see 4.29. Setting the flash time).
4.12. Pause key
If you dial a telephone number and you would like to add a pause to this
number, press the Pause key /P at the desired place in the number.
When you call this number, this pause (3 seconds) is automatically included.
Note: the length of the pause can be set (see 4.31. Setting pause length). You can only
add a pause during dial preparation or while you are programming memory numbers!
Butler 1410
72
handl. B1410 10/9/01 10:39 am Page 72