Topcom 1410 Telephone User Manual


 
Butler 1410
80
Butler 1410
80
Butler 1410
80
The Line indicator will blink for one minute. During this minute, the base unit
is in subscribing mode and you must do the following to subscribe the
handset:
- Press the key once.
- Press the OK key and choose a base unit (1-4) with the keys.
- Press the OK key.
- Enter the pin code of your base station (0000).
- Press the OK key. The Butler 1800T now searches for your DECT base unit.
As soon as it finds it, you will see the identification code of this base unit on
the display.
- Press the OK key to confirm your selection or press the Esc key to cancel.
4.20. Removing subscription of a handset to a base unit
It is possible to cancel a subscription of a handset with a base unit. You would
do this if a handset is damaged and has to be replaced by a new one.
- Repeatedly press the Menu key until 'TELEPHONE' appears.
- Press the OK key.
- Repeatedly press the Menu key until ‘SUBSCRIBE’ appears.
- Press 'OK' or ‘BACK’ to go back.
- Repeatedly press the Menu key until ‘UNSUBSCR HS’ appears.
- Press 'YES' or ‘BACK’ to go back.
- Enter the base unit PIN code (0000).
- The numbers of the registered handsets appear on the display (e.g. 'HS:
123-' handset 1, 2 and 3 are subscribed and these subscriptions can now be
removed).
- Enter the number of the handset you want to remove (1-5) and press OK.
The handset subscription has been cancelled
- Repeatedly press the 'BACK' key to leave the menu.
4.21. Removing subscription to Base unit
It is possible to cancel a base unit subscription.
- Repeatedly press the Menu key until 'TELEPHONE' appears.
- Press the OK key.
- Repeatedly press the Menu key until ‘SUBSCRIBE’ appears.
- Press 'OK' or ‘BACK’ to go back.
- Repeatedly press the Menu key until ‘UNSUBSCR BS’ appears.
- Press 'YES' or ‘BACK’ to go back.
- The numbers of the registered base stations appear on the display (e.g.
'BASE: 123-' Base unit 1, 2 and 3 are subscribed and can now be removed).
- Enter the number of the base unit you want to remove (1-4) and press OK.
- Repeatedly press the 'BACK' key to leave the menu.
Butler 1410
80
handl. B1410 10/9/01 10:39 am Page 80