Filter
Top Products
Butler 1410
79
Butler 1410
79
Butler 1410
79
- Enter the number of the base unit to which you want to subscribe the
handset ‘BASE?’ (1-4). Use the number keypad.
- Press the OK key.
- 'SEARCHING' appears on the display.
- The RFPI code (each base unit has an RFPI code) appears on the display
alternating with the text 'FOUND BS'.
- Press the OK key.
- 'BS PIN?' appears on the display. Enter your 4-figure base unit PIN code
(standard base unit PIN code is '1590'). Use the number keypad.
- Press the OK key.
- The handset is subscribed to the base unit.
4.18. Subscribing a Butler 1410 handset to a Butler
1000/1010/1200/1210 base unit
Press the Paging key on the Butler 1000/1010/1200/1210 base unit for approx.
10 seconds until the Line/Charge indicator on the base unit begins blinking.
The base unit is now in subscribing mode. For 1 minute, the base unit is in
subscribing mode and you have to do the following to subscribe the handset:
- Repeatedly press the Menu key until 'TELEPHONE' appears.
- Press the OK key.
- Repeatedly press the Menu key until ‘SUBSCRIBE’ appears and press the OK
k e y.
- Repeatedly press the Menu key until “SUBSCRIBE HS” appears and press OK.
- Enter the number of the base unit to which you want to subscribe the
handset ‘BASE?’ (1-4). Use the number keypad.
- Press the OK key.
- 'SEARCHING' appears on the display.
- The RFPI code (each base unit has an RFPI code) appears on the display
alternating with the text 'FOUND BASE'.
- Press the OK key.
- 'BS PIN?' appears on the display. Enter your 4-figure base unit PIN code
(standard base unit PIN code is '0000'). Use the number keypad.
- Press the OK key.
- The handset is subscribed to the base unit.
4.19. Subscribing a Butler 1800T handset to a Butler 1410 base unit
The procedure below only applies to a Butler 1800T handset and Butler 1410
base unit!Press the Paging key on the base unit for 5 seconds until the Line
indicator on the base unit begins blinking.
Butler 1410
79
handl. B1410 10/9/01 10:39 am Page 79