Filter
Top Products
Sec tion
3
TR-1 Beltpack
Con trols and Con nec tions - Top Panel
Fig ure 3-1
TR-1 Top Panel
1. On/Off & Vol ume Con trol: Turns the beltpack power on
and con trols head set vol ume.
2.
BAT/O.M. Light:
3. Talk Light: LED is on when the talk but ton is ac tive.
4. Talk but ton: Press to en able the au dio path from the
head set.
5.
A and B Lights: "A" light is on if se lec tion switch in A
po si tion. "B" light is on if se lec tion switch in B position.
6.
Se lec tion Switch: Switches be tween base sta tion pre sets
A or B.
7.
"C" Pushbutton: Press to en able the base sta tion "C"
pre sets.
8.
"C" But ton Light: "C" light is on if "C" pushbutton ac -
tive.
3-1
R
Bat tery
Light flashes on power up = Bat tery OK
Light on continuously = Bat tery Low
Light does not flash or come on = Bat tery Dead
Overmodulation
Light flashes on loud est speech = Gain OK
Light flashes on all speech = Gain too high
Light never flashes on loud est speech = Gain too Low
Selectable Modes:
TALK
Push-to-Talk
Push-to-Latch
Off
Selectable Modes:
But ton "C"
Momentary
Latching
Quarterback
Off
Push-to-Talk
Latch ing Talk