Filter
Top Products
Getting Started 1 - 3
Accessories
Table 1-1 lists the accessories available for the MC70 EDA.
Table 1-1
MC70 Accessories
Accessory Description
Snap-on Cables The EDA supports the following cables:
•
AC line cord (country-specific) and power supply, charges the EDA.
•
Auto charge cable, charges the EDA using a vehicle’s cigarette lighter.
•
DEX cable, connects the EDA to a vending machine.
•
Serial cable, adds serial communication capabilities.
•
USB cable, adds USB communication capabilities.
•
Modem inverter cable.
•
Printer cables, available for O’Neil and Zebra printers from printer
vendors.
Single Slot USB/Serial
Cradle
Charges the EDA main battery and a spare battery. Synchronizes the EDA with
a host computer through either a serial or a USB connection.
Four Slot Ethernet Cradle Charges the EDA main battery and connects the EDA with an Ethernet network.
VCD7000 Vehicle Cradle Installs in a vehicle and charges the EDA main battery and a spare battery.
Provides serial data communication between an MC70 and an external device.
Four Slot Spare Battery
Charger
Charges up to four EDA spare batteries. Includes an adapter.
Headset Use in noisy environments.
Belt Mounted Rigid
Holster
Clips onto belt to hold the EDA when not in use.
Magnetic Stripe Reader
(MSR)
Snaps on to the EDA and adds magstripe read capabilities.
Memory Card (MMC/SD) Provides secondary non-volatile storage.
Software Symbol Mobility Developer Kits (SMDKs), available at:
http://www.symbol.com/mc70.
Spare lithium-ion battery Replacement batteries: standard capacity 1900 mAh battery; extended capacity
3800 mAh battery.
Stylus Performs pen functions.
Trigger Handle Snap-on attachment adds a gun-style handle to the EDA.
Wall Mounting Kit Use for wall mounting the cradles.