Filter
Top Products
Accessories 3-15
Universal Battery Charger (UBC) Adapter
This section describes how to use the UBC adapter to charge a spare battery.
Use the UBC with a power supply as a standalone spare battery charger, or with the four station UBC2000 to simultaneously charge
up to four spare batteries. For additional information about the UBC2000, see the UBC 2000 Universal Battery Charger Product Guide
(p/n 70-33188-xx).
Use only a Symbol-approved power supply (p/n 50-14000-147) output rated 5.4 Vdc and minimum 3A. The
power supply is certified to EN60950 with SELV outputs. Use of alternative power supply will invalidate any
approval given to this device and may be dangerous.
Hinweis: Benutzen Sie nur eine von Symbol Technologies genehmigte Stromversorgung (Teilenr. 50-14000-147) mit einer
Ausgangsleistung von 5.4 V (Gleichstrom) und mindestens 3A. Die Stromversorgung ist nach EN60950 für die
Verwendung in SELV-Stromkreisen zertifiziert. Bei Verwendung eines anderen Netzteils werden alle für das Gerät
gewährten Genehmigungen außer Kraft gesetzt, und der Betrieb kann gefährlich sein.
Battery Insertion and Removal
Insert the battery into the battery well with the charging contacts on the battery aligning with the charging pins on the adapter, and
gently press down on the battery to ensure proper contact.
To remove the battery, press the battery release and lift battery out of the well.
Figure 3-14. UBC Adapter
Battery Charging Indicators
To charge a spare battery using the UBC adapter, insert the spare battery. The spare battery begins charging.