Filter
Top Products
Operating the MC50 2-19
Resetting the Mobile Computer
Performing a Soft Reset
A soft reset restarts the mobile computer and saves all stored records and entries.
Files that remain open during a soft reset may not be retained.
DO NOT perform a soft reset if the mobile computer is suspended. Press the power button to wake the mobile
computer.
To perform a soft reset, press the reset button on the back of the mobile computer with the stylus.
Figure 2-17. Reset Button
Performing a Hard Reset
Hold down the Power and right scan buttons, then press and release the reset button located below the battery release
on the back of the mobile computer. Release the Power and right scan buttons.
Do not hold down any key other than the Power and right scan buttons during a reset. Performing a hard reset
stores formats, preferences and other settings to the default settings.
Any data previously synchronized with a computer can be restored during the next ActiveSync operation.
Refer to the MC50 Integrator Guide for more information.
Infrared Communication
Infrared Receive (IR) allows sending and receiving of information, such as contacts, appointments, and files between two mobile
computers.
Sending Information
To send information:
1. Open the application containing the item to send.
2. Locate the item in the list. For example, a contact name in the Contacts application.
Ensure that the receiving mobile computer is enabled to accept IR beams. See Receiving Information on page
2-21.