Filter
Top Products
9
Installation
PLACING THE BASE ON A DESK TOP
Follow these steps when you place the base on a desk, shelf, or
table.
1
Plug one end of the supplied long modular cord into the
LINE
jack on the back of the base.
2
Route the modular cord through one of the strain relief slots on
the bottom of the base.
3
Insert the supplied AC adapter’s barrel plug into the
POWER
jack on the back of the base.
4
Route the adapter’s cord through the other strain relief slot on
the bottom of the base.
5
Plug the modular cord’s other end into a modular phone line
jack.
6
Plug the adapter into a standard AC outlet.
7
Raise the base’s antenna to a vertical position.
LINE Jack
POWER Jack
Strain Relief Slots
(bottom of base)
Antenna
43-5809.fm Page 9 Wednesday, August 18, 1999 1:43 PM