Filter
Top Products
24
Telephone Operation
²
If you want to make a call but the handset is out of the base’s
range, the handset beeps twice. Move the handset closer to the
base and try again.
USING THE PRIORITY CALLING CODE
When a caller uses the priority calling code, the TAD beeps loudly
to alert you that you have a priority call. Here is how it works.
A caller dials your telephone number from a touch-tone phone.
When the announcement begins to play, the caller enters the prior-
ity calling code.
The system beeps three times, then pauses. This continues for 30
seconds or until you answer the phone. The beeps are audible on
both ends of the call.
If you do not answer, the caller can leave a message in a mailbox.
SETTING THE HANDSET’S VOLUME
You can select any of three
volume levels by repeatedly
pressing
VOLUME
during a
call. Three short beeps sound
when the handset is at the
highest setting. If you press
VOLUME again, the handset
returns to the lowest setting.
VOLUME
43-5809.fm Page 24 Wednesday, August 18, 1999 1:43 PM