Filter
Top Products
11
Installation
4
Insert the tabs on the
narrow end of the bracket into
the upper slots on the bottom
of the base and route the
adapter cord through the slot
on the bracket’s narrow end.
Insert the loose end of the
modular cord through the
center of the bracket. Route
the end of the adapter cord
through the opening on the
wide end of the bracket. Then
push the tabs on the wide end
of the bracket into the lower
slots on the bottom of the
base.
5
Plug the modular cord’s
other end into the wall plate
jack (or a modular phone line
jack), align the base’s key-
hole slots with the wall plate
studs (or the screws in the
wall), and slide the base
downward to secure it.
6
Plug the adapter into a
standard AC outlet. Raise the
base’s antenna to a vertical
position.
Adapter
Upper Slots
Cord
Lower Slots
43-5809.fm Page 11 Wednesday, August 18, 1999 1:43 PM