Filter
Top Products
44
Troubleshooting
If you still have problems, disconnect the SP-809. If other phones
on the same line work properly, the fault is in this phone or its in-
stallation. If you cannot find the problem, take your SP-809 to your
local RadioShack store for assistance.
The phone does not
ring.
Be sure the handset ringer is set to
ON
.
Be sure the base ringer is on.
Be sure the phone line cord and AC
adapter are correctly and securely con-
nected.
Move the handset closer to the base.
There might be too many devices con-
nected to the phone line. Remove a device
from the line.
The handset’s
range decreases.
Raise the base’s antenna to a vertical
position.
Return the handset to the base to
recharge the battery pack.
Be sure the base’s antenna is not touching
a metal surface.
CL
appears in the
display.
Reset the clock. See “Setting the Day and
Time” on Page 15.
Receiver sound flut-
ter or fades.
Be sure the battery pack is charged.
Raise the base’s antenna to a vertical
position.
Move the handset closer to the base.
Can receive calls,
but cannot make
calls.
Set the dialing mode for the type of service
you have (see “Setting the Dialing Mode”
on Page 14).
Problem Suggestion
43-5809.fm Page 44 Wednesday, August 18, 1999 1:43 PM