Filter
Top Products
SpectraLink Corporation Link WTS Installation and Operation
Part Number: 72-0075-01-C-W.doc Page 50
13.8 Certification Test
When the OAI Telephony Gateway is properly connected to the application server, the
LEDs should look like this:
Power On
Error Off
LED 1
LED 2
LED3/IPC On
LED4/SD On when sending data to server
LED5/RD On when receiving data from server
To test the Wireless Telephones:
• If this is a new installation, continue with Wireless Telephone registration and PBX
programming, and perform the usual voice and coverage tests when Wireless
Telephone installation is complete.
• If you added the OAI Telephony Gateway to an existing system, place a call and test
the features on each Wireless Telephone to be sure the system is working properly.
• Test the application on each Wireless Telephone. The SD and RD LEDs should be on
when the OAI Telephony Gateway is communicating with the server (at least every
30 seconds). Consult your application provider for specific test procedures.