SpectraLink 150 M3 MCU Telephone User Manual


 
SpectraLink Corporation Link WTS Installation and Operation
Part Number: 72-0075-01-C-W.doc Page 34
Wireless Telephone Status Indicator Messages
Indicator Description Action
BATT Displays when user is on the
Wireless Telephone and the battery
charge is low. The user has two
minutes to complete the call.
Replace the battery with a charged
battery.
BATTERY LOW Displays when user is not on the
Wireless Telephone and battery
charge is low. The Wireless
Telephone will ring to alert user to
this condition. The Wireless
Telephone will not work until the
battery is replaced.
Replace the battery with a charged
battery.
INTERNAL
ERROR
Communications error between the
Wireless Telephone and the MCU.
Have the user turn the Wireless
Telephone off, then on again. If the
error persists try registering another
Wireless Telephone to this port. If
the problem persists, contact
technical support.
NO PBX There is no telephone system port
connected to the port associated with
this Wireless Telephone, or the
telephone system has not yet
synchronized the port.
This message should disappear
when the telephone system ports are
wired and programmed correctly.
PT
UNREGISTERED
The Wireless Telephone is not yet
registered to an MCU.
Register the Wireless Telephone.