Sony SPP-A9276 Cordless Telephone User Manual


 
Additional Information
86
US
Symptom
You hear five short error
beeps when you press (TALK).
You hear no dial tone.
The phone does not connect at
all, even though the number
you dial is correct.
The phone does not redial
correctly.
You cannot hear anything from
the speakerphone.
(LONG DIST. SAVER) does not
function.
Even by pressing
(LONG DIST. SAVER), the long
distance call is not being made.
The cordless handset does not
ring.
The base phone does not ring.
Remedy
Make sure you have set up the base phone correctly
(page 10).
Move the cordless handset closer to the base phone.
Make sure the telephone line cord is securely
connected to the telephone outlet.
Make sure the battery is fully charged (page 13).
Make sure the dialing mode is set correctly (page 12).
Make sure the dialed number is really the one you
want to dial.
During phone conversation, press (VOLUME)(+) on
the base phone to increase the speakerphone volume.
Make sure that the Long Distance Saver function is set
to “ACTIVE” (page 21).
Make sure that the registered access number is correct
and if the service provider needs any registration
beforehand.
Set the RING switch on the cordless handset to ON.
The battery may be weak. Charge the battery for more
than 12 hours (page 13).
Make sure you have set up the base phone correctly
(page 10).
Move the cordless handset closer to the base phone.
Press (VOLUME)(+) on the base phone to increase the
ringer volume.
Make sure the telephone line cord is securely
connected to the telephone outlet.
Troubleshooting
If you’ve experienced any of the following difficulties while using your
phone, use this troubleshooting guide to help you remedy the problem.
Should any problem persist, consult your nearest Sony dealer.
Making calls
Receiving calls
Long Distance
Saver function