Filter
Top Products
78
US
Caller ID Features
Notes
• If the area code is not entered, “PLEASE ENTER AREA CODE” will appear
on the display, and you will not be able to store into the Phone Directory.
Enter the area code (see page 15).
• Do not allow more than 20 seconds to elapse during the operation procedure.
• If the number displayed in step 1 is not the one you should store, you can
change the number of digits of the phone number as described below.
• If the phone is connected to a Private Branch Exchange (PBX), you may need
to add an outside line access digit.
Tips
• When you select “[GO BACK]”, you can return to the previous set display by
pressing Jog Dial. (If you’re at the base phone, press Jog Button (ENTER).)
• You may press (PROGRAM) instead of doing steps 4 and 5.
To change the number of digits of the phone
number
If the number of digits of the phone number in the Caller ID list is
different from the actual phone number, you need to adjust the
number of digits of the phone number to call back or store into the
Phone Directory.
1 While the phone number from the Caller ID list is displayed,
press (#) repeatedly until the phone number with the
correct number of digits appears on the display.
Each time you press (#), the number of digits changes as
follows:
When the home area code and the local area code do
not match
Using the Caller ID list (continued)
NEW 01
SMITH JOHN
1-201-123-4567
7.04 4:53PM
NEW 01
SMITH JOHN
201-123-4567
7.04 4:53PM
NEW 01
SMITH JOHN
123-4567
7.04 4:53PM
NEW 01
SMITH JOHN
1-123-4567
7.04 4:53PM