Filter
Top Products
45
PJ-Net Organizer
OWNER’S MANUAL
Control the projector
ENGLISH
Service
This function sets parameters for service items of the projector. As these
service items are used mainly for maintenance, please use the default set-
ting unless a change is needed. The adjustments and operation are listed
below. To restore to default setting, press the Initialize button.
Adjustments Operation
Fan Control Speed Select the Max or Normal with radio buttons and then press the Set but-
ton.
Video System* It displays the current selected video system. The video systems and
displays are listed below.
Horizontal* Adjust the valid horizontal width with the + and - buttons.
Vertical* Adjust the valid vertical height with the + and - buttons.
Position* Adjust the screen position with the Up, Down, Left and Right buttons.
✐ The adjustments of Visual Area and Position are effective only for video input mode. These
adjustment values are stored with each video system mode as the above.
- The indication of video system in this page is displayed as follows.
Video System Input Signal
480I NTSC [VIDEO], [S-VIDEO], [Y, Cb/Pb, Cr/Pr]
480P NTSC [Y, Cb/Pb, Cr/Pr]
575I PAL [VIDEO], [S-VIDEO], [Y, Cb/Pb, Cr/Pr]
575P PAL [Y, Cb/Pb, Cr/Pr]
720P [Y, Pb, Pr]
1035I [Y, Pb, Pr]
1080I [Y, Pb, Pr]
* These items are available in the video input mode for models PLC-XP41
series and PLC-XP46 series only.