Filter
Top Products
28
Basic Setting and Operation
Initial Settings
After installing this product onto the projector, perform the following basic
initial setting.
Click on the Initial Setting on the main menu to display the initial setting page.
The Languages, Date/Time and Password can be set in this page. The model name of
the projector on which this product is mounted is displayed on the page.
1 Language Setting
This setting is to select the display language of the web page. Select your lan-
guage from the pull down menu button and then press the Set button. The selec-
table language is English or Japanese. You may find the unrecognized character
text in the menu if the computer does not provide Japanese fonts.
[Note]
This language selection is realized by using the JavaScript function of the web browser. If the
preference of the browser is set not to use the JavaScript, language selection function will not
operate correctly. Please change your preference to use the JavaScript function.
There are various kind of ways to change this preference depending on the web browser's ver-
sion and application. Please refer to chapter “Appendix: Web browser setting/Active Script
(JavaScript enable)”on page 64.
4 Logout
Click on the Log Out linked text on the main menu.
The web browser will logout from the setting page and
displays the login page automatically.
[Important]
If you check the "Save this password" item at the login page, the
saved password will be cleared when logout is performed. In environ-
ments where the setting computer is used by several people, it is
recommended for security reasons that personnel logout or not save
the password at the login page.
Use of Battery
This product provides a lithium battery. When the battery runs down, the clock and timer func-
tions do not operate properly. Contact your local dealer for the replacement of battery. The
replacement must be carried out by a qualified service personnel.
Caution
!