Filter
Top Products
40
Controlling the Projector
Screen Adjustment
This function is to adjust the screen mode of the projector. The setting
items are switched automatically according to selected input mode, com-
puter or video input. The adjustment items and operation are listed below.
Adjustment items Operation
Aspect Used to change the screen mode. Select the screen mode and press the
Set button. * Items of the mode selection may appear with the radio but-
ton or the pull down menu depending on the function of the projector you
use. The options “Normal”, “Wide”, “Fill”, “Zoom” and “Zoom Wide” are
prepared for the screen mode and they are decided by the input signal
and the function of the projector you use.
True* Press the ON or OFF button to select the projected image mode.
Digital Zoom* Expand or compress the projected image by pressing the Up or Down
button repeatedly. To restore the projected image, press the OFF button.
* These items are only available in the computer input mode.
Sound Adjustment
This function is to adjust the sound of the projector. The adjustment items
and operation are listed below. The value next to each control represents
the current control value or status.
Adjustment items Operation
Volume Press the + or - button to increase or decrease the sound volume, or
enter the value* directly onto the text area of the control and then press
the Set button.
Mute To cut off or restore the sound by pressing the ON or OFF button. The
mute will be set OFF if the volume is changed.
✐ The volume adjustment range is 0 to 63.
Current set value