Filter
Top Products
30
NEW MESSAGE (SEND)
This function is used to create and send a new short text message.
• Press the Menu soft button,scroll to Message,then press OK.Scroll to Short
Message [],then press OK.Scroll to New Msg, then press OK.
• Write or create a new short message and press the Next soft button.S
ee Tex
t
Input Method on ho
w to enter charac
ters in text messages.
• Enter the internal extension(s) to send the short message. Scroll to other
entries and enter the station number to send to more users.(Each short mes-
sage can be sent to 1 to 10 users).
• Press the Send soft button to deliver the short message to other user’s inbox.
NOTE: When the message is sent successfully, the message “Sent” is displayed.
When the message fails to send the “Failed to send” is displayed. SMS messages
can only be sent to internally ITP, SMT-W, or SMT-i phones within the same node.
TDM and single line phones cannot send or receive SMS messages. SMS messag-
ing is not supported over networking.
OUTBOX
This function is used to edit and resend a new short text message.
• Press the Menu soft button,scroll to Message,then press OK.Scroll to Short
Message [],then press OK.
• Scroll to Outbox, then press OK to view short text message sent from your
phone.
• Scroll to the desired SMS MSG.
• Press the Del soft button, then Yes soft button to delete the short text mes-
sage or press the End soft button to exit SMS.
NOTE: SMS messages indicated by X icon cannot be deleted from the Outbox.
DELETE ALL
This function is used to delete the short message(s) saved in both the Inbox and
the Outbox.
• Press the Menu soft button, scroll to Message, then press OK. Scroll to SMS,
then press OK.
• Scroll to Delete All,then press OK to view short text message sent from your
phone.
• Press the Del soft button to delete the short text message or press the End
soft button to exit SMS.
NOTE: SMS messages indicated by X icon cannot be deleted from the Outbox.
smt-i3105_combined_user_guide.qxp 4/26/2010 2:11 PM Page 30
31
4. SOUND
This function is used to adjust the selected volume levels
on each phone. This is the same option as station lock in
MMC 114.
• Press the Menu soft button, scroll to Sound, then press OK. Scroll to Ring
Tone, or Key Tone or Volume,then press OK.
• Using the Call Log
ss
/ Phonebook
tt
buttons adjust the volume or sound,
then press OK and Save soft button.
5. SECURITY
This function is used to select the option for each user to
change station password,lock or unlock each phone.This
is the same option as station lock in MMC 100.
• Press the Menu soft button, scroll to Security,then press OK.
• Enter the station password [default 1234].
• Press OK to Change Password and press Back soft button.
• In the Dial mode,use the Left [<-] and Right [->] soft buttons to choose the
Unlock,Lock Out (Outgoing),or Lock All option from the menu.
• In the Menu mode,use the Left [<-] and Right [->] soft buttons to choose the
Unlock or Lock M option (Station locked from changing the Dial Mode) from
the menu.
• In the Password mode,enter the current password (eg;1234)
• Enter the New Password.Re-enter the new password to confirm.Password is
changed.
6. CALL FWD
This function is used to set/cancel call forwarding to each
phone.
• Press the Menu soft button, scroll to Call Fwd, then
press OK,scroll to forward option [Disable,All,Busy,
No Answer, Busy/No Answer, DND or Follow Me
Status],then press Edit soft button.
• Enter the Station or Group Number to forward calls,then press OK or Save.
7. SETTINGS
This function is used to allow station users to set the Dial
Mode to Enbloc or Overlap dial, set the Language, view
the station network Info settings, to view the phone
firmware and boot version,or to clear user settings,such
as the call log and phonebook.
smt-i3105_combined_user_guide.qxp 4/26/2010 2:12 PM Page 31