Filter
Top Products
CONFIGURATION MENU STRUCTURE
The Configuration Menu options are as follows:
1. EASY INSTALL
This option will guide you through setting up all required parameters for con-
necting the SMT keyset to your system.
2. PHONE INFO
1. Version Info: Provides boot rom, software, DSP, and hardware version
information and date.
2. Network Info: Displays network mode, IP address of phone, network
(DNS1, DNS2), Gateway Information, Subnet Mask, MAC Address, LAN
(HUB),LAN (PC), PC Client,and Registered State.
3. MAC Address
3. NETWORK
Displays Static IP, Dynamic IP, PPPoE, NAT, 802.1x, VLAN (LAN), and VLAN (PC).
Set to Use or Not Use.
4. EXT. LOGIN
Allows the user to choose the option of permitting the phone either
login/logout from idle mode or only register to the server on power up.Once
the phone is placed into Extension Login mode,a display will show up to allow
you to enter any valid User ID and password.This function is also referred to
as hot desking (idle login). Set to Use or Not Use.Default password is 1234.
5. SERVER
1. Primary System:The main processor’s IP address.
2. System 1~3: Up to 4 server IPs can be set.
6. S/W UPGRADE
1. TFTP Server:The IP address of the TFTP server containing the IP software.
2. Upgrade: Starts the IP software upgrade process.
7. FACTORY RESET
This option resets the SMT-i3105 to factory default settings.
8. PHONE RESTART
This option reboots the SMT-i3105 phone.
14
smt-i3105_combined_user_guide.qxp 4/26/2010 2:11 PM Page 14
SECTION 3.
FREQUENTLY USED FEATURE
OPERATION
15
smt-i3105_combined_user_guide.qxp 4/26/2010 2:11 PM Page 15