Filter
Top Products
Samsung iDCS500 iDCS Keyset User Guide
–
36
–
3. Replace the handset when finished.
4. Lift the handset and make a page announcement as described above
(example: “Call for John Smith, park two”).
To Retrieve a Parked Call from Orbit:
• Press the PARK key and dial the announced orbit number (0–9).
You will be connected to the parked call.
Note:
§ You must have a PARK key or Park access code to retrieve and place calls in
park orbits.
§ If the parked call is not retrieved within a pre-programmed time, it will recall
your keyset and have a slow flashing amber light.
§ If the Hot Keypad feature has been turned off, you must first lift the handset or
press the Speaker key before you begin dialing.
§ You cannot park and page internal calls.
AUTOMATIC PARK WITH PAGE KEY
1. While in conversation with the caller, press the PAGE key (or select the
PAGE soft key). The call is automatically parked at your extension.
2. Dial the desired page zone and announce the parked call and your ex-
tension number or the line number.
3. Hang up.
To Retrieve an Automatically Parked Call:
1. Press the PARK key or dial 10.
2. Dial the number that was announced.
You will be connected to the parked call.
Note:
• You cannot park and page internal calls.
• If the parked call is not retrieved within a pre-programmed period of time, it
will recall your keyset and have a slow flashing amber light.
• If the Hot Keypad feature has been turned off, you must first lift the handset or
press the Speaker key before you begin dialling.