Filter
Top Products
Samsung iDCS500 iDCS Keyset User Guide
–
21
–
CONFERENCE CALLS
You may connect up to five parties (you and four others)—in any combination
of outside lines and extensions—in a conference call, in any order.
1. While engaged in a conversation with the first party, press the CONF key
or CONF soft key.
OR
Press the Transfer key and dial 46. You receive conference tone.
2. Make another call (internal or external) and press the CONF key, OR the
CONF soft key, OR the Transfer key and receive conference tone.
3. Make another call OR press the CONF key, OR the CONF soft key, OR
the Transfer key to join all parties.
4. Repeat step 3 until all parties are added.
Note: When attempting to add another party to the conference and you are not
able to reach the desired person, hang up. Press the CONF key again to return to
your previous conversation.
To Drop a Party From Your Conference Call:
1. Press the CONF key or the CONF soft key and dial the extension or line
number that is to be dropped.
2. Press the CONF key or the CONF soft key again to re-establish the con-
ference without the dropped number.
LEAVING A CONFERENCE
To leave a conference, hang up. Control is passed to the next internal exten-
sion. If there are no internal extensions and you wish to leave outside lines
connected together in a trunk to trunk (‘unsupervised’) conference, press the
CONF key then the CALL key that the call appears on, or follow the instruc-
tions to drop a party (above) using your extension number. When outside
callers hang up, the lines will release automatically. Press the CONF key to
rejoin a trunk to trunk conference.
Note: Check with your system administrator whether your system is set up to al-
low this feature to work correctly.