Filter
Top Products
Samsung iDCS500 iDCS Keyset User Guide
–
4
–
• Outside Call Ring: Flashing Green
• Recall Ring: Flashing Amber
• Message Waiting: Flashing Red
• Do Not Disturb: Flashing Red
SYSTEM TONES (UK)
Internal Dial Tone—a continuous steady tone that indicates you can begin
dialling.
Ringback Tone—indicates the extension you dialled is ringing.
Busy Tone—indicates the extension you dialled is busy.
DND/No More Calls Tone - fast busy tone indicates the extension you dialled
is in Do Not Disturb mode or cannot receive any more calls.
Transfer/Conference Tone—indicates your call is being held and you can dial
another party.
Confirmation Tone—very short beeps followed by dial tone indicate you have
correctly set or cancelled a system feature.
Error Tone—a continuous single-level tone indicates you have done some-
thing incorrectly and should try again.
SELECTING FEATURES USING DISPLAY
MENUS
Your keyset’s display can be used to select features without the need for
programmed keys. You press the Scroll key to display feature menus on the
LCD and then use the soft keys to select the required feature(s).
The three soft keys below the LCD are substitutes for dedicated feature keys
and access codes. Pressing one of these keys has the same effect as
pressing a programmed key. These keys are context sensitive and their func-
tions change to present you with the best options for a particular call condi-
tion.
The Scroll key is used to display options available at a particular time or dur-
ing a specific procedure. Press this key once while in the idle state to view
the main feature menus available.