Filter
Top Products
Samsung iDCS500 iDCS Keyset User Guide
–
47
–
1. While on-hook, press the Transfer key and dial 100.
2. Dial your 4-digit extension passcode.
3. Dial 1 to set the keyset to Locked Out
OR
Dial 2 to set the keyset to Locked All.
4. Press the Transfer key to store your selection.
UNLOCKING YOUR KEYSET
1. While on-hook, press the Transfer key and dial 100.
2. Dial your 4-digit extension passcode.
3. Dial 0 to set the keyset to Unlocked.
4. Press the Transfer key to store your selection.
MANUAL SIGNALLING
(‘L’ VERSION SYSTEMS ONLY)
Use this feature when you want to send a brief ring burst to another exten-
sion, regardless of the status of your phone (on-hook, off-hook, hands-free,
DND, or ringing). Your phone must have a Manual Signalling (MS) key with
an extension number extender assigned to it.
• Press the MS key.
You may press the MS key repeatedly to send multiple signals to the desig-
nated extension.
OFF-HOOK VOICE ANNOUNCING (OHVA)
While engaged on another call, a keyset can receive voice announcements
(OHVA calls) from other keysets via the handset or speaker. OHVA calls,
however, cannot be received if a keyset is in DND mode or has an OHVA
Block set (see below). The OHVA feature will work with internal and trans-
ferred calls.
MAKING OHVA CALLS
To make OHVA calls to a busy extension you must have an OHVA key.
1. Dial the extension number or press the DSS key for the extension.
2. When you receive a busy signal, press the OHVA key.
3. After the attention tone, begin speaking.
4. Finish the call by replacing the handset or pressing the ANS/RLS key.