Filter
Top Products
Samsung iDCS500 iDCS Keyset User Guide
–
37
–
MESSAGE WAITING INDICATIONS
You can inform another station user that you wish to speak with them by
leaving a message waiting indication at their keyset. Other users may leave
message waiting indications at your keyset.
SETTING A MESSAGE WAITING INDICATION
When you are calling another extension or extension group and no
one answers or you receive a busy signal, you can leave a message
waiting indication:
1. Press the Message key (or the MSG soft key in the display)
OR
Dial 43
You receive confirmation tone.
2. Hang up. The Message key on the called extension or on all of the ex-
tensions in the group will flash. (The keyset status indicator on iDCS
keysets will also flash red. Other types of phone may have a similar spe-
cial multi-function lamp which flashes. Standard telephones receive a
special dial tone as a message indication.)
If you want to leave a message waiting indication without first ringing
the extension or extension group:
• Dial 41 plus the extension or group number.
Note:
1. An individual extension can have up to five message waiting indications.
2. If the Hot Keypad feature has been turned off, you must first lift the handset or
press the Speaker key before you begin dialling.
CANCELLING MESSAGES
• To cancel a message waiting indication that you left at another
extension, dial 42 followed by the extension number of the extension at
which you left a message.
• To cancel all message indications left by other users at your key-
set, without replying to them, dial 42 followed by your extension num-