Filter
Top Products
Samsung iDCS500 iDCS Keyset User Guide
–
52
–
HEADSET OPERATION
When using a headset, you press the ANS/RLS key to answer and release
calls. You can switch between handset mode and headset mode easily.
1. While on-hook, dial Transfer 110.
2. Dial 021 to use the headset or 020 to use the handset. (Or use the soft
keys and Volume keys to select the option in the display.)
3. Press the Transfer key to store your selection.
If you have a programmed HDSET key, press this to select Headset mode. The
key LED will remain on while you are in this mode. Press the key again to return to
handset mode (the LED turns off).
HOT KEYPAD
Your keyset’s keypad can be made “live” or “hot” so that it is not necessary
to lift the handset or press the Speaker key before you begin dialling. Calls
can be made and features activated by simply dialling the line number, trunk
group access code, internal number or feature access code. To activate this
feature:
1. While on-hook, dial Transfer 110.
2. Dial 031 to turn the Hot Keypad on or 030 to turn it off. (Or use the soft
keys and Volume keys to select the option in the display.)
3. Press the Transfer key to store your selection.
KEY CONFIRMATION TONE
You normally hear a short beep (confirmation tone) each time you press a
key on the dial keypad. This tone can be turned on or off.
1. While on-hook, dial Transfer 110.
2. Dial 041 to turn tones on or 040 to turn tones off. (Or use the soft keys
and Volume keys to select the option in the display.)
3. Press the Transfer key to store your selection.