Filter
Top Products
6. Press the DIR button to store the redial number in the Phone Book memory or press
an MEMORY LOG button (1-16) to store the redial number in that memory location.
Storing a Pause in Memory
Press the #PAUSE button twice to insert a pause in the dialing sequence of a stored
telephone number when a pause is needed (for example, when you must dial a 9 to get an
outside line or when you must enter codes to access your bank’s information line).
Dialing a Stored Number
1. Pick up the handset, or press SPEAKER to automatically select a line. Or press the line
you want to use.
2. Wait for a dial tone.
3. Press the MEMORY LOG button (1-16) for the person you want to call.
The number automatically dials.
OR
1. Press the DIR button.
2. Use the VOL (+ or -) buttons to scroll up or down through the phone book memories,
or use the touch tone pad to enter the corresponding letters for the memory you want to
review. For example, press the 5 key to display phone book memories that start with the
letter J. Press the 5 key twice to go to memories starting with the letter K.
3. Pickup the handset on the cradle or press the line button directly, The number
automatically dials.
Memory Delete/Clear
To delete a Phone Book memory:
1. Press the DIR button.
2. Use the VOL (+ or -) buttons to scroll up or down to the memory you want to delete.
3. Press the DELETE button to delete. DELETE -DELETE AGAIN shows in the display.
To Delete an Memory Log:
1. Press the DIR button.
2. Press the corresponding button (1-16) for the Memory Log you want to delete.
3. Press the DELETE button to delete, DELETE -DELETE AGAIN shows in the display.
NOTE: Press the EXIT button to cancel the “delete” function.
52