Filter
Top Products
Local Area Code
1. Press the Menu softkey while in standby mode.
2. Use the VOL (+ or -) buttons to scroll up or down to SET AREA CODE.
3. Press the Select softkey.
4. Use the VOL (+ or -) buttons to scroll up or down to LOCAL AREA CODE.
5. Press the Select softkey. Enter Number shows in the display.
6. Use the touch tone pad on your phone to enter your local area code.
7. Press the Select softkey to save.
NOTE: If you make a mistake, press DELETE to erase all digits.
Regional Area Codes
Depending on your location, you may need to set up to six regional area codes. Setting
Regional Area Codes helps the phone determine the number format to display when a
valid CID record is received. Call records matching any of the set regional area codes are
displayed as 10 digits.
NOTE: If the CID telephone number does not display correctly, you may not be able to dial
back the number from the Caller ID menu.
You may need to set regional area codes if you reside in an area which:
18
• uses multiple area codes
• uses overlapping area codes
• requires 10-digit dialing.
1. Press the Menu softkey while in standby mode.
2. Use the VOL (+ or -) buttons to scroll up or down to SET AREA CODE.
3. Press the Select softkey.
4. Use the VOL (+ or -) buttons to scroll up or down to REGIONAL AREA CODES.
display.
6. Use the touch tone pad on your phone to enter up to six regional area codes.
7. Press the Select softkey to save.
NOTE: If you make a mistake, press the Delete softkey to erase all digits.
Manually Setting the Time and Date
system. To manually reset the time and date, follow the steps below.
store in the digital router and can be set by any one 25825 in the
1. Press the Menu softkey while in standby mode.
2. Use the VOL (+ or -) buttons to scroll up or down to SET TIME and DATE.
3. Press the Select softkey.