Filter
Top Products
Making Calls with an Optional Headset
1. Connect the headset plug into the HEADSET JACK on the right side of the base.
2. Adjust the headset to rest comfortably on top of your head and over your ear.
3. Move the microphone to approximately 2-3 inches from your mouth.
4. Press the HEADSET button and the phone automatically selects the priority line. If the
priority is occupied, it selects an open line.
5. Wait for a dial tone, then dial a phone number.
NOTE: If the headset is not connected (or if not completely inserted in to headset
CAUTION: For servicing or replacement, you can purchase a suitable headset through
service centre or retailer shop.
jack), an
error tone is heard when the HEADSET button is pressed and the display will show error for
several seconds.
41
Pre-dialing
1. With the phone idle and the handset on the cradle, manually enter the telephone number.
The telephone number shows in the display.
2. Press the DIAL softkey to take a line, and the telephone number is automatically dialed.
Answering Calls
If you receive a call on the priority line,
1. Pick up the handset (handset mode), OR
2. Press the SPEAKER button (speakerphone mode), OR
3. Press the HEADSET button (headset mode).
button.
If you receive a call on a line other than the priority line,
1. Pick up the handset and press the corresponding line button (handset mode), OR
2. Press the SPEAKER button and press the corresponding line button (speakerphone mode),
OR
3. Press the corresponding line button, and then press the HEADSET button (headset mode).
button.
Note: If you don't want to answer the incoming call, press the Exit soft key to reject, and
then press another line button to make another call.