Filter
Top Products
32
Inc. approved Nickel-metal Hydride (Ni-MH) battery GP, 2.4V, 550mAh (T-T104),
700mAh (T-2734) that is compatible with this unit.
1. Make sure handset is OFF (not in TALK mode) before you replace battery.
2. Remove the battery compartment door.
3. Disconnect the battery plug from the jack inside the battery compartment and
remove the battery pack from the handset.
4. Insert the new battery pack and connect the cord to the jack inside the battery
compartment.
5. Put the battery compartment door back on.
6. Place handset in the base or handset charge cradle to charge. Allow the handset
Deleting All Caller ID Records
To delete all the Caller ID records in memory:
1. Use the CID/ button and then VOL ( or ) button to display any Caller ID
record.
2. Press and hold Delete/Mute. The display asks DELETE ALL? for several seconds.
3.
return to standby mode.
Caller ID Errors
If there is an error in the transmission of information to your Caller ID phone,
INCOMPLETE DATA is displayed.
If you have not subscribed to Caller ID service or it is not working, NO DATA is displayed.
Call Waiting Caller ID
Provided you subscribe to Caller ID with Call Waiting service from your phone company,
you may see who is calling when you hear the call waiting tone in the receiver. The CID
information appears in the display after you hear the tone.
Press the Flash/Exit button to put the current call on hold and answer the incoming call.
IMPORTANT: In order to use all of the features of this unit, you must subscribe to
either the standard Name/Number Caller ID Service or Call Waiting Caller ID Service.
To know who is calling while you are on the phone, you must subscribe to Call
Waiting Caller ID Service.
Changing the Battery
Caller ID