Filter
Top Products
18
3.Use the Vol (+ or -) buttons to scroll up or down to PHONE ID.
4.Press the Sel/Save button.
5.Press the Sel/Save button again to automatically set the phone ID,
or use the keypad to enter your desired phone ID.
NOTE: The Phone ID (01-16) must be unique. If you manually select a phone ID that
belongs to another unit on the system, NOT AVAILABLE shows in the display. Press
Sel/Save or choose another memory button.
connected to the system. A maximum of 16 phones can be connected in the system
at one time.
NOTE: You may press the Exit button at any time to exit , except during the ID search.
Phone Name
1.Press the Menu button while in standby mode.
2.Use the Vol (+ or -) buttons to scroll up or down to PHONE SETTINGS.
3.Press the Sel/Save button.
4.Use the Vol (+ or -) buttons to scroll up or down to PHONE NAME.
5.Press the Sel/Save button.
6.Use the touch-tone pad to enter the phonebook name (up to 8
characters). More than one letter is stored in each of the number keys.
For example, to enter “Lorraine,” press the 5 key three times for the
letter L. Press the 6 key three times for the letter O. Press the 7 key three
times for the letter R. Press the 7 key three times for the letter R. Press
the 2 key once for the letter A. Press the 4 key three times for the letter I.
Press the 6 key two times for the letter N. Press the 3 key twice for the letter E.
7.Press the Sel/Save button to save.
Connections and Setup
4.Use the Vol (+ or -) buttons to scroll up or down to DELAY RING.
5.Press the Sel/Save button.
6.Use the Vol (+ or -) buttons to scroll up or down to 0 ring up to
10 rings.
7.Press the Sel/Save button to save.
Phone ID
Press the Menu button while in standby mode.
1.Use the Vol (+ or -) buttons to scroll up or down to
PHONE SETTINGS.
2.Press the Sel/Save button.