Filter
Top Products
25
Intercom Operation
1. When the unit is idle, press the DND/Privacy button. The last setting is displayed.
2. Use the Vol (+ or -) buttons to scroll up or down to select the duration. You may
choose from 15 minutes, 30 minutes, 45 minutes, 1 hour, or 2 hours and increase the
duration by 1 hour intervals up to 24 hours.
disabled.
4. To cancel, press Privacy button again.
NOTE: To silence the ring of an incoming call without answering, press the PAGE button
on the base. The call will continue normally without ringing, and can still be answered.
Hold
1. Press the Hold button to put a call on hold.
2.
Transfer
You can transfer the call to another extension.
1. Press the Int/Transfer button when it is in TALK mode.
2. Key in the extension ID number you want to transfer to.
3. The desired extension will ring, and your handset will go back to standby mode.
Privacy
When you are using the phone, if you want to secure the line, press the Privacy button.
Then, the line you are using cannot be picked up by another extension in the system.
Flash
Use the Flash/Exit button on the handset to activate custom calling services such as call
waiting or call transfer, which are available through your local phone company.
Call Timer
After you press Talk or Line plus number button to select the line on the cordless
handset, the built-in call timer shows in the display and begins counting the length of
time of the call.
Out of Range
If the handset is too far from the base (out of range) you may experience static or noise.
Move closer to the base or handset will automatically hang up if it is kept out of range
for 30 seconds.