Filter
Top Products
19
NOTE: You may press the Exit button at any time to exit.
Call Alert Tone
Turn on the Call Alert to hear a tone for incoming calls while you are on the
using the phone. If you do not want this tone to disturb your conversation, you can
set it to OFF.
1. Press the Menu button while in standby mode.
2. Use the Vol (+ or -) buttons to scroll up or down to PHONE SETTINGS.
3. Press the Sel/Save button.
4. Use the Vol (+ or -) buttons to scroll up or down to CALL ALERT TONE.
5. Press the Sel/Save button.
6. Use the Vol (+ or -) buttons to scroll up or down to ON or OFF.
7. Press the CID button,the cursor moves to Line 2 if necessary.
8. Repeat steps 6 and 7 for each telephone line .
9. Press the Sel/Save button to save.
No Unknown/Blocked
This option allows you to decide whether the unknown or blocked caller ID calls
are saved in the caller ID log or not. If you select YES, the unknown or blocked calls
will be saved.
1. Press the Menu button while in standby mode.
2. Use the Vol (+ or -) buttons to scroll up or down to PHONE SETTINGS.
3. Press the Sel/Save button.
4. Use the Vol (+ or -) buttons to scroll up or down to UNKNOWN/BLOCKED.
Connections and Setup
NOTE: The Phone Name and ID shows in the display when the Handset is idle.
Flash Time
Press the Menu button while in standby mode.
1.Use the Vol (+ or -) buttons to scroll up or down to PHONE SETTINGS.
2.Press the Sel/Save button.
3.Use the Vol (+ or -) buttons to scroll up or down to FLASH TIME.
4.Press the Sel/Save button.
The default setting is 600ms.
6.Press the Sel/Save button to save.