Filter
Top Products
Answering System Operation
33
&'.'6+0)"/'55#)'5
To delete the current message while it is playing,
press
DELETE
. The system beeps.
To delete all messages, while messages are not
playing, press
DELETE
. The system beeps and
announces, “To delete all messages, press
DELETE
again.” Within 30 seconds, press
DELETE
. The
system beeps, the display clears momentarily, then
&
&&
&
appears.
±ý
4'/16'"12'4#6+10
While you are away from your home or office, you
can use a touch-tone phone, or a pulse (rotary)
phone with a pocket tone dialer (available through
RadioShack), to enter your security code and do
any of the following:
• Set the system to answer or not answer calls.
• Listen to your messages.
• Record a new outgoing message.
• Record a memo.
• Erase messages.
±ý
5GVVKPI"VJG"5GEWTKV["%QFG
The two-digit remote operation security code
prevents unauthorized remote access to your
messages. The code is preset to 80. To change the
code to any number from 00 to 99:
1. Press
MENU
twice. The system announces
“Security code,” followed by the currently set
code. The code appears.
2. Repeatedly press or hold down
|
6
or
7
|
to
change the number.
3. Press
SET/RING
to store the setting. The
system announces “Security code,” followed by
the newly set code.
±
"016'"
±
"
Deleting Messages
You cannot delete new
(unplayed) messages. If
you attempt the procedure
to delete all messages
while you still have new
messages, the system
beeps and announces
“Please play back all
messages.”
Remote Operation
You cannot remotely
operate the system using its
handset or another
telephone on the same line.