Filter
Top Products
Telephone Operation
16
disconnecting the current call. Press
TALK/FLASH
again to return to the first call.
If you do not have any special phone services,
pressing
TALK/FLASH
might disconnect the current
call.
75+0)"4'&+#.
To quickly dial the last number dialed, lift the
handset and press
RDL/PAUSE
, then press
TALK/
FLASH
. You can also press
RDL/PAUSE
after
pressing
TALK/FLASH
.
±ý
/76+0)"6*'"4+0)'4
To temporarily mute the ringer’s tone when you
receive a call with the handset off the base, press
END
. The ringer automatically turns back on when
you receive another call.
75+0)"610'"5 '48+%'5"10"#"27.5'"
.
+0'
Some special services, such as bank-by-phone,
require tone signals. If you have pulse service, you
can still use these special tone services. Dial the
service’s main number. When the service answers,
press
∗
∗∗
∗
6
66
6
/TONE
. Any additional numbers you dial
are sent as tone signals.
When you hang up, the phone automatically resets
to pulse dialing.
2#)+0)
To page the person who has a handset or to locate
the handsets when the phone is not in use, press
PAGE
on the base. Both handsets beep for about
one minute. To stop it from beeping sooner, press
any key on the handset. Press
PAGE
again to stop
the paging at the base.
±
"016'"
±
"
• The redial memory holds
up to 32 digits, so you
can redial long-distance,
as well as local
numbers.
• The redial memory also
holds pause entries (see
“Entering a Pause” on
Page 20).