Filter
Top Products
Caller ID Operation
22
4. Press
CH/SEL
.The phone beeps and
DkcX[hý
DkcX[hýDkcX[hý
DkcX[hý
Ijeh[Z
Ijeh[ZIjeh[Z
Ijeh[Z
appears.
7UKPI"5RGGF"&KCN
To dial the number stored in speed dial, lift the
handset and press
SPEED DIAL
. The number is
instantly dialed.
&GNGVKPI"C"0WODGT"KP"/GOQT["
1. Lift the handset.
2. Hold down
SPEED DIAL
until the menu screen
appears.
3. Press
9
or
8
to select
:[b[j[ýDkcX[h
:[b[j[ýDkcX[h:[b[j[ýDkcX[h
:[b[j[ýDkcX[h
, then
press
CH/SEL
.
4. Press
8
to move the cursor to
O[i
O[iO[i
O[i
, then press
CH/SEL
or
TRSF/DEL
. The phone beeps, and
DkcX[hý:[b[j[Z
DkcX[hý:[b[j[ZDkcX[hý:[b[j[Z
DkcX[hý:[b[j[Z
appears.
%#..'4"+&"12'4#6+10
If you subscribe to Caller ID service from your
phone company, the phone company sends
information about the call, as well as the time and
date, between the first and second rings of every
call you receive.
The phone displays this information after the
second ring, and stores up to 30 Caller ID records in
each handset for later review. It also shows if caller
information is unavailable or if the name and
number were blocked by the caller (see “Caller ID
Messages” on Page 24).
±
If the phone’s Caller ID memory becomes full, any
new call replaces the oldest call record.
If you subscribe to Call Waiting and Caller ID, you
will hear a tone through the handset when a call
comes in, then the Caller ID record appears. If you
±
"016'"
±
"
Normally, the record
contents are the same in
both handsets, but can
differ if either handset was
out of range or its battery
pack was discharged when
Caller ID data was
received.