Filter
Top Products
Telephone Operation
20
'PVGTKPI"C"2CWUG
Some telephone systems require you to dial an
access code (9, for example) and wait for a second
dial tone before you can dial an outside number.
You can store the access code with the phone
number. However, you should also store a pause
after the access code to allow the outside line time
to connect.
To enter a 2-second pause, press
RDL/PAUSE
.
F
FF
F
appears. You can add more pause entries for a
longer pause.
4GXKGYKPI"/GOQT["0WODGTU
To review your memory numbers,
press
MEM
. The
list of memory location numbers (
'
''
'
–
&
&&
&
) appears with
the name stored with each number (or
2C[cehoýd4
2C[cehoýd42C[cehoýd4
2C[cehoýd4
if you did not store a name).
To see the stored phone numbers,
press #/
7
77
7
. An
arrow to the right of the number means it is longer
than 14 digits. Press
#
##
#
7
again to see the rest of the
number. Repeatedly press
∗
∗∗
∗
6
66
6
/TONE
to return to
the name display.
To exit the memory number list,
press
END
.
To see a stored name and phone number at the
same time,
press
CH/SEL
when the cursor is by a
memory location number. To exit this display, hold
down
TRSF/DEL
until the screen clears, or press
END
.
&KCNKPI"C"/GOQT["0WODGT
1. Lift the handset and press
MEM
to dial a stored
memory number. The list of memory location
numbers appears.
2. Choose a memory location (
0
–
9
) by pressing a
number or by repeatedly pressing
8
88
8
or
9
,
then press
TALK/FLASH
.