Radio Shack 43-683 Cordless Telephone User Manual


 
Memory Dialing
21
6'56+0)"5614'&"'/'4)'0%;"07/$'45
If you store an emergency service’s number (police
department, fire department, ambulance) and you choose to
test the stored number, make the test call during the late
evening or early morning hours to avoid peak demand
periods. Also, remain on the line to explain the reason for
your call.
4'8+'9+0)"/'/14;"07/$'45"
**
#0&5'6"10.;+
To review your memory numbers
, press
MEM
. The list of
memory location numbers appears with the stored name (or
c[cehoý
c[cehoýc[cehoý
c[cehoýd
dd
dd
dd
d
if you did not store a name). If necessary, scroll
through the list by repeatedly pressing
CONF
/
9
or
8
/
INTCM
,
or by entering the two-digit location number (01, 02, 03,
etc.).
To see the stored phone numbers
, press
#
/
7
. An arrow to
the right of the number means it is longer than 14 digits.
Press
#
/
7
again to see the rest of the number. Repeatedly
press
6
/
*
to return to the name display
1
To exit the memory number list
, press
MEM
.
To see a stored name and phone number at the same time
,
press
SELECT/VOLUME
when the cursor is by a memory
location number. To exit this display without storing any
changes, hold down
DEL/FLASH
until the display clears.
&+#.+0)"#"/'/14;"07/$'4
To dial a number stored in the handset’s memory
, lift the
handset and press
MEM
. The first three memory location
numbers appear. Choose a memory location (01– 30) by
pressing number keys or repeatedly pressing
8
/
INTCM
or
CONF
/
9
, then press
LINE 1
or
LINE 2
. The phone
automatically dials out the number.
±
To dial a number stored in the base’s memory
, press
LINE 1
or
LINE 2
. When you hear a dial tone, press
MEM
and enter
the memory location number for the number you want to
dial.
%*#+0/&+#.+0)"5'48+%'"07/$'45
For quick recall of numbers for special services (such as
alternate long distance or bank by phone), store each group
of numbers in its own memory location.
±
"016'"
±
"
You can also press LINE 1 or
LINE 2 first, then choose a
memory number to dial.
If you select an empty memory
location, the base beeps five
times.