Filter
Top Products
Memory Dialing
18
2. Press
INTERCOM
or
8
/
INTCM
again to transfer the call
when the person at the base or handset answers.
To start a 3-way call, tell the person at the base or
handset to press the line button for the call, then press
the same button twice on your keypad when they
answer the page.
/'/14;"&+#.+0)
You can store up to 30 numbers in the handset’s memory
and another 10 in the base’s memory, then dial a stored
number by pressing a memory location number. You can
also store a name with each number in the handset's
memory. Each stored number can be up to 20 digits long,
and each name can be up to 13 characters.
You cannot dial a number stored in one memory location
(the base or the handset) using the keypad on the other.
5614+0)"#"07/$'4"+0"/'/14;
+P"VJG"* CPFUGV
1. Lift the handset.
2. Hold down
MEM
until
C[cehoýIjeh[
C[cehoýIjeh[C[cehoýIjeh[
C[cehoýIjeh[
and a list of memory
location numbers (and names, if any) appears.
3. Select an empty memory location (or one you want to
replace) by entering the location number (01–30) or
using
8
/
INTCM
or
CONF
/
9
to scroll through the list.
Precede a single-digit number with a 0 (for example,
01, 02, 03, etc.).
±
4. Press
SELECT/VOLUME
.
Ijeh[ýDWc[
Ijeh[ýDWc[Ijeh[ýDWc[
Ijeh[ýDWc[
appears. If you do
not want to enter a name, skip to Step 6.
5.
To enter a name
, use the number keys. Refer to the
letters on the number keys to select the desired letter.
Press the key once for the first letter in upper case,
press twice for the second letter in upper case, and so
on. To enter the lower case letter, press four times (or
five times) to display the first letter in lower case, five or
six times for the second letter, and so on.
For example, to enter John: press
5
once; upper case
@
@@
@
appears. Then press
6
six times; lower case
e
ee
e
appears.
Press
4
five times; lower case
^
^^
^
appears. Finally, press
6
five times; lower case
d
dd
d
appears.
±
"016'"
±
"
• An error tone sounds and the
phone exits the storing process
if you wait more than 30
seconds between key presses.
• If the phone sounds five quick
beeps, you have made an entry
error and the number was not
stored. Re-enter the location
number.
• Each tone or pause entry uses
one digit of memory.